Hot Weather Concrete Finishing Aid / Provides More Time For Finishing

Tam Tech Finishing Aid is a spray applied product designed to provide more time to finish concrete flatwork in hot, dry or windy conditions. It helps contractors produce high quality concrete flatwork and avoid concrete setting before they can complete the finishing operations. It also helps to also prevent plastic shrinkage cracking on the surface. It is supplied in a concentrate and with a dilution ratio of up to 9 to 1 with water.

PRODUCT FEATURES:

• Prevents rapid drying of the concrete during hot weather
• Provides more finishing time in hot weather
• Helps prevent plastic shrinkage cracks on the surface
• Ideal for concrete finishing in hot, dry, windy conditions
• Reduces concrete crusting in hot weather
• Does not affect concrete strength
• Compatible with sealers

INSTRUCTIONS:

Dilute Tam Tech Finishing Aid with up to 9 gallons of water to one gallon of product and mix completely. Apply diluted product with a low pressure fine spray at 400 to 500 sq ft per gallon. (9.8 sq m/liter) Product should be sprayed in a fine mist after the screeding process or after bullfloating. When conditions are very dry or windy, reapply product between finishing operations. Clean up with soap and water. 

TECHNICAL DATA:

Tam Tech Finishing Aid is a water based product designed to provide more time to finish concrete flatwork in hot, dry or windy conditions. Spray Tam Tech Finishing Aid after dilution with up to 9 gallons of water per 1 gallon of Tam Tech Finishing Aid. Thus each gallon of Tam Tech Finishing Aid will cover over 4000 sq ft.

Limitations: Do not use as a curing compound. Do not apply during final troweling operations. Product will not work after concrete cures. Do not allow the stored product to freeze. For colored concrete, apply product to a test area first. If product is spilled on fully cured concrete, clean immediately and rinse with water. Apply a curing compound after finishing operations.

Shelf Life: One year in unopened containers. Do not allow stored product to freeze since it is water based.

Coverage:400 to 500 sq ft / gallon (9.8 sq m/liter) after dilution with up to 9 gallons of water per 1 gallon of Tam Tech Finishing Aid. Thus each gallon of Tam Tech Finishing Aid will cover over 4000 sq ft. 

Clean Up: Clean-up with water.

Packaging: 1 gallon (3.8 L) units, (4 per case) and 55 gallon (208 L) drums 

Cure Time: NA

Warning: Skin or eye contact may cause irritation. If eye contact occurs, flush will water. Use safety glasses and wear gloves. See SDS for complete information. For industrial use only. Keep out of reach of children.